 |
| © 2004 - 2007 Alpine SnowGuards, a division of Vermont Slate & Copper Services, Inc. |
ColorGard™ Snow Retention Systems
S-5! ColorGard™ is an excellent choice for snow retention where an exact color match is required. By using the same material and factory applied finish as the roof itself, ColorGard assures a perfect match. S-5! clamps are the way to attach anything to a standing seam roof. Other clamps and brackets are available to attache ColorGard to almost any roof. ColorGard is an effective and economical way to provide snow retention on just about any roof. It's easy to install, matches the roof exactly and is as dependable and fade resistant as the roof itself. Note: we only carry unpunched ColorGard rail which requires VersaClips to attach to the clamp. We do not stock or sell the pre-punched ColorGard.
The S-5! "U" clamp fits the majority of standing seam roofs in the US. It comes with 2 stainless steel set screws and a bolt. The clamp is drilled on both sides for set screws,but only two should be used and they should both be on the same side of the clamp. The VersaClip slides onto the back of the ColorGard rail and is bolted to the clamp. The bolt is supplied with the clamp. SnoClips clip onto the ColorGard rail between the clamps. They come in two sizes SnowClip 2 and SnoClip 3. SnoClip 2 is for seams that are 1" to 1 3/4" high and SnoClip 3 is for seams that are 1 3/4" to 3" high. SnoClips have a rubber foot that rests against the roof. We generally leave the color insert up to the local roofing contractor. For best results, you should use the same material as the roof. The ColorGard rail takes a 2" strip of metal roof material and slides in just like a name tag. Technical Information
Resources |
||
|
[ Home - Contact Us - Snow Guards - Place Order - FAQ - Search ]
Alpine Snow Guards
|
||
The ColorGard system consists of the clamps, VersaClips, SnoClips and the ColorGard rail itself. The clamps are non-penetrating for
standing seam metal roofs, there are several different clamps available for different seam styles. The "U" clamp fits most
standard double-locked seams. It can be mounted sideways to fit on single-locked or "L" shaped seams, we refer to this as
a "T" installation. The "T2" or "T2K" clamp
fits "T" shaped seams and the "Z2K" fits zip-ribbed seams. Maximum spacing between clamps is 32" and in some cases multiple
rows of ColorGard are required.