Product Layout and Warranty Information
Alpine SnowGuards will prepare a product spacing and layout pattern for each particular
project based solely upon the information provided by the customer. We will request that
the customer complete and return an installation information sheet along with the executed
order form. The owner, contractor or architect must be knowledgeable about anticipated snow
load, roof slope and orientation, roof composition, and the specific areas to be protected
if snow guards are to be installed on less than all of the roof surface. All of this information
is necessary to determine the most appropriate type, quantity, and layout pattern for each
project. Unless otherwise instructed by the owner, contractor or architect, we rely upon
the snow load capacities specified by geographic region in Minimum Design Loads for
Buildings and Other Structures published by the American Society of Civil Engineers.
Alpine SnowGuards warrants all products manufactured by it to be free from defects in material
or workmanship for a period of two years from the date the product is received by the customer.
This warranty assumes 1) the accuracy of the information provided to it by the customer, and 2)
product installation in accordance with the layout pattern provided by it or the published
installation instructions contained in this web site. We also note that installation using
an adhesive product should be performed in accordance with the adhesive manufacturer's published
instructions. Alpine SnowGuards does not warrant against adhesive failure. The customer must rely
upon the adhesive manufacturer's published warranty, if any.
|
